Safety regulations for the use of Lathe Machines
1. Check the devices, tools and fixtures of the lathe, which are flexible and reliable. The workpiece should be clamped and pushed with a thimble. It should be rotated by hand for trial operation. After confirming that the condition is good, the machine can be driven. feed amount and adjust the speed.
2. During the turning process, do not touch the workpiece to check the smoothness of the workpiece. When sanding with sandpaper, the tool holder should be removed first. When the lathe is turned, do not brake by hand.
3. Square wood must be processed into a cylinder first and then processed on a lathe. Wood with knots or cracks shall not be cut on a lathe