Lathe Machine Features
Structural features
The woodworking Lathe Machine is a conjoined structure of the main shaft box and the feed box. It is suitable for machining workpieces with large diameter and short length. High-speed steel or carbide tools can be used to process steel parts, cast iron parts and light alloy parts. Rough and fine turning of inner hole, end face, taper face, grooving, cutting, etc.
Performance characteristics
The woodworking Lathe Machine has excellent performance. According to the survey, it is basically possible to "stop parking and work three shifts a day". But the premise is that timely maintenance must be carried out in accordance with the instructions. Moreover, for rough turning machining, the number of cutting tools can reach about 3. The optimized design of the transmission system greatly reduces the failure rate of the machine tool, and the specially treated gear system can transfer more damping torque to each axis, so that the axis The force is applied to the part, thereby protecting the tooth part.
technical parameter
1. The turning diameter of the bed is 610MM
2. The maximum workpiece rotation diameter on the tool holder is 250MM
3. Maximum cutting length 900MM
4. The distance from the center of the spindle to the plane guide rail of the bed is 305MM
5. The number and range of the forward rotation of the spindle speed: 24 levels, 10-1400r/min
6. The number and range of reversal stages of spindle speed: 12 stages, 14-1580r/min
7. Spindle diameter 52mm