When using a Lathe Machine, the installation conditions must be considered

When using a Lathe Machine, the installation conditions must be considered

The requirements of the Lathe Machine on the environment: the position of the Lathe Machine should be far away from the vibration source, the influence of direct sunlight and thermal radiation should be avoided, and the influence of humidity and airflow should be avoided. If there are vibration sources around the Lathe Machine, anti-vibration grooves should be set on all sides of the machine tool. Otherwise, it will directly affect the machining accuracy and stability of the machine tool, which will cause poor contact of the electronic components, failure, and affect the reliability of the machine tool.

Power requirements: Generally, the Lathe Machine is installed in the wood processing workshop, not only the ambient temperature changes greatly, the use conditions are poor, and there are too many mechanical and electrical equipment, resulting in large fluctuations in the power grid. Therefore, the location where the CNC Lathe Machine is installed requires strict control of the power supply voltage. Power supply voltage fluctuations must be within the allowable range and remain relatively stable. Otherwise, the normal operation of the CNC system will be affected.

When using the Lathe Machine, the installation conditions must be considered. The installation environment must be conducive to the adjustment of the equipment and the normal operation of the Lathe Machine. Considering it, the following points are summarized.