The Lathe Machine has been widely developed.

The Lathe Machine has been widely developed.

There are gears in the Lathe Machine. When there is a problem with the gears in our CNC woodworking Lathe Machine, we must find a way to find the cause and deal with it. The specific method will be introduced to you in detail below.

As the most commonly used mechanical equipment, the development of CNC equipment has also attracted much attention, but the development of equipment will still have its pioneering and progress, which requires everyone to spend some time to adapt and understand. As an innovative equipment for woodworking Lathe Machines, the use of CNC woodworking Lathe Machines is still a hot spot. But sometimes people don't pay too much attention to some issues when choosing equipment. Recently, users have called to ask about the handling of the gears of CNC woodworking Lathe Machines. Here's a brief introduction:

We all know that the CNC woodworking Lathe Machine will work according to the rotation of the gear when it moves, but the question is if there is a problem with the gear, what should we do? Here is a brief introduction for you:

The main forms of gear failure are gluing, wear, broken teeth, and pitting.

Gluing: When the gear is at high speed, heavy load or lubrication failure, the two tooth surfaces directly contact to form a local high temperature, and a large area of adhesion occurs in the contact area, which is gluing.

Wear: During the gear transmission process, the relative sliding on the tooth surface will cause wear;

Broken teeth: In the gear transmission, due to various reasons, one or more teeth are broken to make the gear invalid;

Pitting corrosion: In the process of gear transmission, the contact stress of each point on the contact surface of the gear changes in a pulsating cycle. After a period of time, small fatigue cracks will be formed due to the fatigue of the metal on the contact surface, and the expansion of the crack will cause the metal to peel off and form pitting;